注：买家请以一对（2台）一起购买。若有拍单一，工厂只发单RT一台。
输入:HDMI，CAT
输出:HDMI，CAT
视屏高清HDMI转换延长hdbaset支持红外传输4K支持EDID /IR使用HD Base-T技术之单线CAT.5e / 6 / 6a HDMI距离延长器;
1.影像传输采未压缩方式，最高达 1080p / 60Hz / 48 bits，
2.支持3D、4K x 2K；1080p / 60Hz / 24 bits采用单条CAT.5e / 6 网路线传输距离最远可达到 90米，采用CAT.7网路线传输距离最远可达到 100 米
3.支持 HDMI 1.4，符合HDCP规范
4.支持LPCM 7.1、Dolby TrueHD、DTS-HD等数字音频
5.支持红外线讯号延伸功能，红外线讯号可切换传输方向（双向IR）
Thank you for purchasing this product. For optimum performance and safety, please read the instruction carefully before connecting, operating or adjusting this product. Please keep the manual for future reference.
Caution:
The extender using UTP cable termination follows the standard of IEEE-568B.
I. 视屏高清HDMI转换延长hdbaset支持红外传输4K支持EDID /IRIntroduction
The cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts/100meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by Internet cable. It also supports Transfer Bidirectional Infrared control signal \\RS232 control signal\\Internet signal together with the HDMI signal, so you can control the Source in the Sink side which is 328fts outside, also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender.
II.视屏高清HDMI转换延长hdbaset支持红外传输4K支持EDID /IR Features
- 1. 1. POE(Power Over Ethernet)function support, either TX or RX powered 12V@2.5A,another don’t need power form the DC jack. POE Power Consumption less than 10W. ※ See the description 1
- 2. 2. Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distances transmission.
- 3. 3. UTP cable termination follows the standard of IEEE-568B.
- 4. 4. Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit 4K x 2K@30Hz@24bit.
- 1. 5. HDMI V1.4 HDCP1.4 supported.
- 2. 6. Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
- 3. 7. Transfer Bidirectional Infrared control signal together with the HDMI signal. ※ See the description 2.
- 4. 8. Transfer Bidirectional RS232 control signal together with the HDMI signal. ※ See the description 3.
- 5. 9. Transfer Bidirectional Ethernet signal together with the HDMI signal. ※ See the description 4.
III.视屏高清HDMI转换延长hdbaset支持红外传输4K支持EDID /IR Package
- 1. 1. HDMI Extender Transmitter ------------------------------------------ 1PCS
- 2. 2. HDMI Extender Receiver ---------------------------------------------- 1PCS
- 3. 3. Wideband IR Tx --------------------------------------------------------- 2PCS
- 4. 4. Wideband IR Rx --------------------------------------------------------- 2PCS
- 5. 5. 12V2.5A DC Power Supply adapter --------------------------------- 1PCS
- 6. 6. Operation Manual ------------------------------------------------------ 1PCS
- 7. 7. Phoenix male jack--------------------------------------------------------2PCS
- 8. 8. Mounting ears------------------------------------------------------------4PCS
IV. 视屏高清HDMI转换延长hdbaset支持红外传输4K支持EDID /IR Specifications
- 1. 1. Frequency Bandwidth2.97Gbps
- 2. 2. Transmitter Input/Output Ports1x HDMI Female port/2xCAT6
1x IR Tx/1x IR Rx/1xPhoenix
- 1. 3. Receiver Input/Output Ports1xHDMI Female port/2xCAT6
1x IR Tx/1x IR Rx/1xPhoenix
- 1. 4. Power Supply DC 12V 2.5A
- 2. 5. ESD Protection ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
- 1. 6. Dimensions (mm) 100(W) X 100 (D) X 25 (H)
- 2. 7. Weight 320g x 2
- 3. 8. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
- 4. 9. Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
- 5. 10. Relative Humidity 20~90% RH (Non-condensing)
- 6. 11. Power Consumption (Max) 20W
V. Operation controls and Functions
Transmitter
- 1. 1. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
- 2. 2. IR IN: Chanel 1 IR Receiver. Connect with Wideband IR Rx.
- 3. 3. IR OUT: Chanel 2 IR Transmitter. Connect with Wideband IR Tx.
- 4. 4. HDBaseT OUT: Standard HDBaseT signal output port. Connect HDBaseT receiver with a UTP cable follows the standard of IEEE-568B.
- 5. 5. DC IN: Plug the 12V DC power supply into the unit.
- 6. 6. LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver is good connections.
※Flashing: The Transmitter and Receiver is poor connections.
※Dark: The Transmitter and Receiver is no connections.
- 1. 7. DATA LED: The data status indicating lamp.
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.
- 1. 8. HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
- 2. 9. INPUT LED: The input status indicating lamp. This red LED illuminate when the HDMI signal plug in.
- 3. 10. ETHERNET: This slot provide Internet signal from receiver or to receiver.
- 4. 11. UPDATE: System software update.
Receiver
- 1. 1. RS232: Phoenix jack provide Serial port control signal from transmitter or to transmitter.
- 2. 2. IR IN: Chanel 2 IR Receiver. Connect with Wideband IR Rx.
- 3. 3. IR OUT: Chanel 1 IR Transmitter. Connect with Wideband IR Tx.
- 4. 4. HDBaseT IN: Standard HDBaseT signal input port. Connect HDBaseT transmitter with a UTP cable follows the standard of IEEE-568B.
- 5. 5. DC IN: Plug the 12V DC power supply into the unit.
- 6. 6. LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver is good connections.
※Flashing: The Transmitter and Receiver is poor connections.
※Dark: The Transmitter and Receiver is no connections.
- 1. 7. DATA LED: The data status indicating lamp.
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.
- 1. 8. HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable
- 2. 9. OUTPUT LED: The output status indicating lamp. This red LED illuminate when the TV plug in with HDMI cable.
- 3. 10. ETHERNET: This slot provide Internet signal from transmitter or to transmitter.
- 4. 11. UPDATE: System software update.
有用到4K延长器的亲问联系旺旺或电话：
HBT-E100 采用HDbaseT特制芯片传输技术，支持目前HDMI全部技术特性，支持传输超高清分辨率的HDMI信号，超大提升您的高清娱乐体验，用一根普通的网线，即可将电视以及其他显示设备与蓝光DVD播放器等娱乐设备连接起来，以实现家庭内部高清多媒体内容的融合式传播。这种未压缩的高清视频传输技术，能够延长未压缩高清多媒体内容传输的距离，扩大传播范围，简化安装，降低系统总成本。
............................................................................................................................................................................................................................................