型号 Model | 适用范围 Applicable scope | 设计参数 Design variable | 工艺变化说明 Craft change explanation | 水量增减% Water volume fiuctuation |
进水 Enters the water | 出水 Water leakage |
ZYTH-Ⅰ-K | 生活污水 Sanitary sewage | BOD5200 CODcr400 SS400 | BOD530 CODcr100 SS70 | 减少接触氧化与沉淀时间 The reduction catalytic oxidation and precipitates time | 增加处理量25% Increases process load 25% |
ZYTH-Ⅱ-K | 生活污水脱氨 Sanitary sewage ammonia | NH3-N | 15 | 增加厌氧反应池，二沉池污泥回流 Increases the anaerobic response pond，two sink the pond sludge backflow | 减少处理量20% Reduced process load 20% |
其余与标准型相同 Other and the standard type is the same |
ZYTH-Ⅲ-K | 高浓度有机污水的处理 Highly concentrated organic sewage processing | BOD5 600-1000 | BOD560 | 取消消毒池，增加一个接触氧化罐，接触氧化时间为8-9h增加风机 Cancels the disinfection tank，increases a catalytic oxidation time is 8-9h increases air blower | 与标准型相同 Is the same with the standard type |
ZYTH-Ⅳ-K | 生活污水的回用 Sanitary sewage sales commission | BOD5200 CODcr400 SS400 | BOD510 CODcr40 SS10 | 增加过滤系统 Increases filtration system | 减少处理量15% Reduced process load 15% |
ZYTH-Ⅴ-K | 医院污水处理 The hospital sewage processes | 与标准型相同 Is the same with the standard type | 增加消毒时间至1.5-2.5小时 Increases the disinfection time to 1.5-2.5 hour | 减少处理量13%-20% Reduced process load 13%-20% |
ZYTH-Ⅵ-K | 生活污水脱磷脱氮 Sanitary sewage dephosphorization denitrogenation | NH3-N P | 15 1 | 在Ⅳ型基础上增加酸化池 Increases acidified pond in Ⅳ foundation | 减少处理量30% Reduced process load 30% |
其余与标准型相同 Other and the standard type is the same |
ZYTH-Ⅶ-K | 生活杂污水的回用 Lives the mixed sewage sales Commission | BOD5100 CODcr150 SS150 | BOD510 CODcr40 SS10 | 减少氧化时间增加过滤系 The reduction catalytic oxidation time increases the filtration department | 增加处理量20% Increases process load 20% |