常见问题 Problem | 产生原因 Possible Cauese | 解决方法 olution |
毛刺Burr | 齿节距太大 Tooth pitch is too large | 调整齿节距 Adjusting teeth pitch |
锯齿已磨损 Saw tooth are with abrasion | 重新磨齿 Gringing saw teeth |
锯齿间废屑太多 Too much scraps produced between saw teeth | 齿节距大小 Tooth pitch is too small | 调整齿节距 A sjusting teeth pitch |
错误的齿型 Tooth form is too high | 重新开齿 Re-hobbing sawing speed |
速度太快 Sawing speed is too high | 调整速度 Adjusting sawing speed |
锯片爆裂 Saw blade crached | 切割速度太高 Cutting speed is too high | 调整切割速度 Adjusting the cutting speed |
进料速度太高 Feeding speed is too high | 调整进料速度 Adjusting the cutting speed |
锯片进刀速度不稳定 Feeding speed of the saw blade Is not stable Enough | 调整锯片进刀速度 Adjusting the feeding speed of The saw blade |
进料和切割速度比错误 Incorrect tatio occurred between the feeding speed And cutting speed | 调整速度比 Adusting the speed ratio |
锯片没夹紧 Saw blade is nor firmly clanped | 检查法兰 Checking the flange |
加工材料没夹紧 Work piece is not firmly clanped | 检查夹具 Checking the clanp |
齿节距太小或太大 Tooth pitch is too large or too small | 调整齿节距 Adjusting teeth pitch |
润滑或冷却液没有或不足 Ubricant or cooling oil is absent or insufficient | 检查机械 Checking the machine |
管材焊缝不均 The tubing welded joint is uneven | 更换管材 Replacement tubing |